On the other hand there are a lot more duct cleaning business that will appropriately clean the air system and duct and make use of industrial damaging duct cleaning vacuums with a minimum of 2,000 CFMs of vacuum power and use correct agitating tools to move the contaminants within the duct to be recorded with HEPA filters and consisted of by the duct cleaning vacuum devices.
Ensuring that your duct and air systems will be appropriately cleaned with the right devices, workers has the appropriate training and is a Florida accredited Mechanical Contractor which has the knowledge in cleaning your house or structure, is a little cost to spend for the possible health positive aspects for you, your household, or the residents of the structure.
There is some disagreement within the industry about the best method for cleaning air ducts.  The two schools of thought are the “negative air” approach and the rotary brush and vacuum approach.  We believe that both air duct cleaning methods can achieve great results in most situations when performed properly by competent technicians.  However, our focus has always been on high quality residential service.  The type of residential duct work commonly used in homes in the South poses unique challenges to duct cleaners because it is soft, flexible, and does not go in straight lines.  Firms using the negative air approach are especially challenged by this type of duct work, as that process was originally designed to work well on the rigid metal duct work commonly found in the North and in large commercial buildings.  The tools used to agitate the duct work in negative air cleaning are very difficult to get all the way into your duct work and can damage the lining of the ducts we find in most residences in the greater Jacksonville area.

Make sure that the company has the proper equipment and enough HEPA filtered vacuum power (2,000 CFMs or more), to properly clean your air ducts. Be weary of companies that use small vacuum units that have a small rotating brush on the end of a small vacuum hose with a typical airflow of 150 to 300 cfm or less. Proper air duct cleaning vacuums are negative air machines with 2,000 CFMs have 8 inch to 14 inch or larger, vacuum hoses to capture large quantities of dust and debris.


When having your air ducts cleaned, it’s a good idea to have them sealed too. This sealing technology closes any air leaks that may have occurred over years of work and can save you potentially hundreds of dollars and lots of energy. It’s a great way to end home pollutant circulation once and for all. Ask a Air Engineers Service Experts professional to check for leaks when they clean your air ducts and explain if you could benefit from having your ducts sealed. Live in comfort and never worry about polluted air again. It should be known that Air Engineers Service Experts does not handle asbestos in our duct cleaning routines. The thing about air ducts is that “if they look dirty, they probably are.” Call the professionals from Air Engineers Service Experts Heating & Air Conditioning today at 904-450-5672 to set up a cleaning appointment, complete with a full inspection for leaks and a guaranteed deep clean of your entire heating and cooling ventilation system.
Jacksonville Duct Cleaning is a full service air duct cleaning provider in the Metro Jacksonville area. We specializes in Professional air duct cleaning and much more. We service all of Northeast Florida, metro Jacksonville, Duval, Clay, Nassau, and St. Johns County, Orange Park, Ponte Vedra, St. Augustine, Palatka, Middleburg, Starke, Baldwin, Green Cove, and points west to Lake City.
×